Use the WebAdmin Interface to configure the XIMSS module. Open the Access page in the Settings realm:
Use the Log setting to specify the type of information the XIMSS module should put in the Server Log. Usually you should use the Major (message transfer reports) or Problems (message transfer and non-fatal errors) levels. But when you experience problems with the XIMSS module, you may want to set the Log Level setting to Low-Level or All Info: in this case protocol-level or link-level details will be recorded in the System Log as well. When the problem is solved, set the Log Level setting to its regular value, otherwise your System Log files will grow in size very quickly.
The XIMSS module records in the System Log are marked with the XIMSSI tag.
When you specify a non-zero value for the Maximum Number of Channels setting, the XIMSS module creates a Listener. The module starts to accept all XIMSS connections that clients establish in order to communicate with your Server. The setting is used to limit the number of simultaneous connections the XIMSS module can accept. If there are too many incoming connections open, the module will reject new connections, and the client should retry later.
By default, the XIMSS module Listener accepts clear text connections on the TCP port 11024. Follow the Listener link to tune the XIMSS Listener.