The Server Administrator can specify when and how often the Server is allowed to generate outgoing TCP/IP traffic. This helps to limit the time your Internet dial-up link is up.
Use the WebAdmin Interface to configure the TCP Activity Schedule. Open the Network pages in the Settings realm, and follow the Schedule link.
Log Level: Use this setting to specify what kind of information thew TCP Activity Schedule component should put in the Server Log. Usually you should use Major (session starts) levels. But when you experience problems with the TCP Activity Schedule component, you may want to set the Log Level setting to Low-Level or All Info: in this case the schedule calls and schedule processing details will be recorded in the System Log as well.
The TCP Activity Schedule component System Log records are marked with the TCP tag.
Days of Week: This setting specifies the week days when this TCP Scheduler element should be used.
When: This setting specifies the time period when outgoing TCP Activity is allowed.
If the first time setting is larger than the second one, it specifies an "over-the-midnight" time period: 19:30 - 07:30 means from 19:30 till midnight and from midnight till 7:30 in the morning.
Pause: This setting specifies the minimal time interval between successive outgoing "TCP sessions".
You can remove elements from the Schedule by setting the Day of Week option to Never, and you add elements to the Schedule by changing the Day of Week option value in the last dummy (Never) element.